Natural Chemistry Spa Purge

Directions:

For Spas/Hot Tubs

1. Begin by removing the cartridge filter elements from your spa.
2. Ensure the spa water temperature is at least 95ºF. With the circulation on, pour the entire bottle of Natural Chemistry Spa Purge into the water.
3. Activate the jets for at least 5 minutes. Note: Foaming may occur, which is normal. If foaming becomes excessive, turn off the jets.
4. Maintain the water temperature at 95ºF and let the circulation continue overnight with the jets off.
5. Once the process is complete, drain the spa. Thoroughly rinse and clean the spa surfaces before refilling with fresh water. Reinstall the filter elements.
6. Continue with your regular spa maintenance routine.

For Jetted Tubs

1. Fill the tub with hot water, ensuring it covers the jets by 1 inch.
2. Add half a bottle of Spa Purge to the tub water.
3. Run the jets for 5 minutes; expect some foaming as part of the process.
4. After running the jets, turn them off and let the solution sit for at least 5 hours.
5. Reactivate the jets to flush out the system.
6. Finally, drain the tub and clean its surface as necessary.

Utilizing these spa purge instructions ensures optimal results with your Natural Chemistry Spa Purge, maintaining a clean and healthy spa or tub environment.

Dosage:

For Spas and Hot Tubs

To effectively cleanse your spa or hot tub, pour the full bottle of Natural Chemistry Spa Purge into the water. This easy spa purge process ensures thorough cleaning for a refreshing soak.

For Jetted Tubs

Achieve optimal results by adding half a bottle of Spa Purge to the jetted tub. Ensure the water level is 1 inch above the jets to facilitate outstanding performance. Following these spa purge instructions will keep your jetted tubs in pristine condition.