BioGuard Chlorinating Liquid

Instructions for Applying the Product:

1. Optimal Timing for Application: Introduce the recommended dosage of this product into your pool during the evening hours, ensuring that the filter pump is operational to facilitate even distribution.
2. Application Method: Distribute the product uniformly across the pool's surface, focusing on the deepest areas to ensure thorough mixing. Utilize a clean, dry scoop specifically for measuring out the product, avoiding its use for any other substances.
3. Handling Settled Granules: Should any granules not dissolve and settle at the pool's bottom, gently brush them to aid in their dispersion.

Guidelines for Routine Chlorination:

• pH Level Maintenance: Keep the pool's pH within the range of 7.2 to 7.6 for optimal results.
• Total Alkalinity: Aim to maintain total alkalinity between 80 and 120 ppm.
• Calcium Hardness: Ensure that the calcium hardness level remains above 200 ppm to prevent pool damage and water imbalance.

Determining the Required Amount of Product:

• Chlorine Level Testing: Use a reliable test kit to measure the available chlorine levels in your pool.
• Dosage Efficiency: 1 gallon of this product will raise the free chlorine level by approximately .5 - 2 PPM per 10,000 Gallons, depending on the condition of your pool.

Dosage Recommendations:

• For Unstabilized Pools: Administer 1-2 Gallon of the product for every 10,000 gallons of pool water daily or as necessary to sustain a free available chlorine residual of 1-4 ppm.
• For Pools Stabilized with Cyanuric Acid: Add 1 Gallon of this product for every 10,000 gallons every other day or as required to keep the free available chlorine residual within the 1-4 ppm range. Make sure to check your CYA level!

Sodium Hypochlorite: 12.5% | Water: 87.5%